uart_server
The uart server is intended for work with serial ports (COM-ports): UART (RS232), RS485 via RS485-USB and etc. interface converters
Contents
- Setup
- Using
- work with uart_server in CLI mode
- work with uart_server in TCP mode
- Output uart_server data files description
- Contacts
Setup
- Install Rust compiler (if you don't have). Installation on Linux:
curl --proto '=https' --tlsv1.2 https://sh.rustup.rs -sSf | sh
Installation on Windows:
Go to address https://www.rust-lang.org/tools/install and follow instructions
For more detailed information you can go to: https://doc.rust-lang.ru/book/ch01-01-installation.html
Instruction for setup uart_server project
- Clone the repo to your computer:
git clone http://heagit.cosmos.ru/gamkov/uart_server.git
- Enter the repo and compile it:
cd <PATH_TO_UART_SERVER>
cargo build --release
After running this commands you will get an execution file (uart_server) in the following directory:
<PATH_TO_UART_SERVER>/target/release/
Using
work with uart_server in CLI mode
- See current available serial ports (Ubuntu):
sudo setserial -g /dev/ttyUSB*
- for access to operation with hardware run program with sudo (specify available serial port):
sudo ./uart_server -m cli -p /dev/ttyUSB1
- In cli mode type 'help' in order to get information about programs command system
work with uart_server in TCP mode
- See current available serial ports (Ubuntu):
sudo setserial -g /dev/ttyUSB*
- for access to operation with hardware run program with sudo (specify available serial port and desired IP-address, port for uart-server):
sudo ./uart_server -m tcp:127.0.0.1:10000 -p /dev/ttyUSB1
Output uart_server data files description
log files are located in directory: <PATH_TO_UART_SERVER>/log/
description:
cmd_<data>_<user_name_file>.log - file with output data to serial port
data_<data>_<user_name_file>.log - file with input data from serial port
cmd_data_<data>_<user_name_file>.log - file with output and input data to and from serial port
where <data> - file generation date,
<user_name_file> - user filename addition (for more information type help in CLI mode)
File data log fromat:
data represented in csv-format (with ';' separation)
column 1: timestamp in format: YYYY.mm.dd HH:MM:SS.zzz (for example: 2025.03.26 16:00:01.158)
column 2 for cmd and cmd_data log files: data that was sent to the serial port
column 2 for data log file: data that was received from serial port
column 3 for cmd_data log file: data that was received from serial port
column 3 for cmd and data log files: no data available
Contatcs
For questions about the program, please contact Danila Gamkov, mail: danila_gamkov@cosmos.ru